Close Close Preview

Your amazing online presence is right this way.

Create your profile
Capture who you are, what you do, and where you're going. All in one place.

Mark Riepenhoff

Mark Riepenhoff

Lima, OH

Message
MENU ☰

Tradesmen International

Ironworker

Rod busting:
1) Cut and fit wire mesh or fabric, using hooked rods, and position fabric or mesh in concrete to reinforce concrete.
2) Cut rods to required lengths, using metal shears, hacksaws, bar cutters, or acetylene torches.
3) Bend steel rods with hand tools and rodbending machines, and weld them with arc-welding equipment.
4) Determine quantities, sizes, shapes, and locations of reinforcing rods from blueprints, sketches, or oral instructions.
5) Position and secure steel bars, rods, cables, or mesh in concrete forms, using fasteners, rod-bending machines, blowtorches, and hand tools.
6) Space and fasten together rods in forms according to blueprints, using wire and pliers.

Structural Ironwork
1) Assemble hoisting equipment and rigging, such as cables, pulleys, and hooks, to move heavy equipment and materials.
2) Bolt aligned structural-steel members in position for permanent riveting, bolting, or welding into place.
3) Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
4) Drive drift pins through rivet holes in order to align rivet holes in structural-steel members with corresponding holes in previously placed members.
5) Erect metal and precast concrete components for structures such as buildings, bridges, dams, towers, storage tanks, fences, and highway guard rails.
6) Fasten structural-steel members to hoist cables, using chains, cables, or rope.

Career medium 06
Career
Career medium 04

Forever Foundation Repair

Foundation Repair Specialist

1) Install waterproofing, egress windows, foundation repair, basement finishing and crawlspace products.
2) Load, unload, and identify materials, and tools, and distribute them to the appropriate locations, according to project plans.
3) Measure, mark, and record specifications and distances to lay out areas where construction work will be performed.
4) Provide assistance to other workers and foreman as necessary.
5) Read and interpret plans, instructions, and specifications to determine work activities.
6) Operate all tools and equipment required to do each job. Care for these tools and equipment in order to ensure long lasting use.
7) Clean and prepare construction areas to eliminate possible hazards.
8) Ensure proper clean-up of all work areas after each job is complete.

Career

Bomac Contracting

Ironworker

Ironworker
1) Position and secure steel bars, rods, cables, or mesh in concrete forms, using fasteners, rod-bending machines, blowtorches, or hand tools.
2) Space and fasten together rods in forms according to blueprints, using wire and pliers.
3) Determine quantities, sizes, shapes, and locations of reinforcing rods from blueprints, sketches, or oral instructions.
4) Place blocks under rebar to hold the bars off the deck when reinforcing floors.
5) Cut rods to required lengths, using metal shears, hacksaws, bar cutters, or acetylene torches.
6) Cut and fit wire mesh or fabric, using hooked rods, and position fabric or mesh in concrete to reinforce concrete.
7) Bend steel rods with hand tools or rodbending machines and weld them with arc-welding equipment.

Concrete Layer
1) Check the forms that hold the concrete to see that they are properly constructed.
2) Set the forms that hold concrete to the desired pitch and depth, and align them.
3) Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
4) Mold expansion joints and edges, using edging tools, jointers, and straightedge.
5) Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
6) Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.

Carpentry
1) Measure and mark cutting lines on materials, using ruler, pencil, chalk, and marking gauge.
2) Follow established safety rules and regulations and maintain a safe and clean environment.
3) Verify trueness of structure, using plumb bob and level.
4) Shape or cut materials to specified measurements, using hand tools, machines, or power saw.
5) Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required.
6) Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue.

Worked for huge Refinery's like Chevron, Valero in Port Arthur, Texas.

Career medium 05
Career
Career medium 05

QPL

General Foreman

1) Work within precise limits or standards of accuracy.
2) Rate information us' standards which can be measured or checked.
3) Compare and see differences 'in the size, shape and forms of lines, figures and object.
4) Look at blueprints, drawings or pictures and understand how they would look as solid objects with height, width or depth.
5) Apply basic mathematical skills.
6) Follow oral and written directions.

Career

JD Davis Steel

Ironworker Foreman

1) Work within precise limits or standards of accuracy.
2) Rate information us' standards which can be measured or checked.
3) Compare and see differences 'in the size, shape and forms of lines, figures and object.
4) Look at blueprints, drawings or pictures and understand how they would look as solid objects with height, width or depth.
5) Apply basic mathematical skills.
6) Follow oral and written directions.

Career medium 02
Career
Career medium 05

Bluffton Flying Service

Line Crew and Maintenance

Line Crew & Maintenance

1) Customer service, sales
2) Maintenance, fueling & cleaning aircrafts.
3) Snow removal, mowing with Massey Fergusion 225 & super heavy duty flail, push mower, weed eater
4) Aircraft mover/tractor, tug E20 Elec-Track with Titan GPU Hybrid Start Cart, Generac 4000 EXL Generator, & GH-220 Electric Start Engine
5) Repair of runway & taxiway lights with basic welding.
6) Software programs Total FBO, Air BP, Microsoft Word.
7) Office knowledge of multi-line phone system, fax machine, cash drawer and filing

Career

DTR

Factory Worker

1) Factory worker on a curing line.
2) Bead blaster
3) Sandblaster
4) Metal Finishing
5) Machine repair and maintenance on die-molder

Rhodes State College

Business, Business Management

Local 846 Ironworkers Apprenticeship Program

Journeyman Rodman

Bath High School

General Education